Dealing With Blue (Copper) Water
Dealing With Blue (Copper) Water by Melanie
Blue water occurs when chemicals in the water react with the copper
in copper pipes, causing it to either dissolve into the water
(clear blue) or else corrode from the pipes without dissolving
(cloudy blue). It happens worldwide and with both rainwater and
mains water.
One of the easiest ways to deal with it is to let the tap run until
water that has been sitting in your copper pipes has flushed out
and there is fresher water coming through. Another method is to
change the copper pipes to plastic, though you may notice a plastic
taste to the water. The third alternative is to drink bottled
water, which tastes better and may be safer than copper water.
If your water is cloudy blue you're in luck because you can get
filters to catch the copper particles. The copper dissolving causes
clear blue water, so the more expensive filtration process needed
may not be cost effective. If you are concerned about the amount of
blue staining on fixtures, you may ask your water authority to test
for copper levels. Although it will cost you, at least you'll find
out if the levels pose a health risk.
If you use tank water, there are a few things you can do to help
stop the corrosion. Adding chlorine seems to reduce copper
corrosion, so calculate the amount of water in your tank and add
hypochlorite at the rate of 0.5mg/L. Bottled water however is a
better option for drinking/cooking purposes as it is usually
filtered and is chemical-free.
Need information on bottled water as an alternative to copper
water? Get bottled spring
water delivered to your home or office with Tranquil Water
(http://www.tranquilwater.com.au) for clean, great-tasting water.
Water
cooler dispenser available for lease.
Article Directory: Article Dashboard
